Parkhurst Manufacturing Co., Inc.

	FLEETLINE MODEL:PFS9612 - 12' X 96 Smooth Steel Floor w/42" Bulkhead Specifications

	TOUGHLINE MODEL: PTS9618 - 18' X 96" Smooth Steel Floor w/52" Bulkhead MODEL: PTS9612 - 12' x 96" Smooth Steel Floor w/RC409612 12' x 96" Stake Racks Specifications

	STRUCTURELINE MODEL: PCS9616 - 16' X 96" STRUCTURELINE WITH 52" HEAVY DUTY BULKHEAD Specifications

	RANCHER MODEL: PHS9609 - 9' X 96" RANCHER SPECIAL Specifications Rancher Special Bale Spike Body We took the very popular Rancher Special and added an electric hydraulic bale spike. This model will fast become your favorite piece of equipment. Simple, rugged design for trouble free service. Quick removal of dual forged bale spikes allow easy access to body and gooseneck hitch. Heavy-duty hinge points and a heavy-duty 12-volt gear pump are standard. The Racher Special Bale Spike Body includes recessed gooseneck hitch with trap door; a heavy-duty receiver hitch, 3" structural crossmembers and 5"

	CONTRACTOR RACKS MODEL: RD149612 12' X 96" DROP SIDE STYLE Specifications

	GRAIN RACKS MODEL: RG529612 52" SOLID PANEL GRAIN WITH STANDARD REAR (OPTIONAL REARS AVAILABLE) Specifications

	STAKE RACKS MODEL: RC409612 - 12' X 96" STAKE RACKS Specifications

	LANDSCAPE RACKS MODEL: LE429612 - 12' X 96" X 42" LANDSCAPE RACK



	HOIST MODEL LM1420 AND LM1520 LM1420 is a NTEA class B/10 while the LM1520 is a class C/20. Versatile in use for body lengths from 8 to 16 feel with truck chassis from 60" to 120" cab to axle provide a variety of lift capacities with dump angles from 40 to 55 degrees. Both hoist are designed for easy installation on today's one-ton cab chassis. The hoist mounts totally above the truck frame eliminating most interference with fuel tanks and exhaust. Optional 2-piece sub-frame offers seven factory set dump angles. Two choices in hydraulic pumps are available, electric and direct mount. All systems are double acting, power-up/power-down for total control of your load. Direct mount pumps have a neutral lock cable and electric have push button control as standard. Body prop is included. All necessary hardware, hoses and fittings are also included. Another quality built product by Parkhurst, offering a proven design for reliability, strength and trouble free service. Specifications

4-Way Mount Simplifies mounting...avoids most truck chassis crossmember problems and axle interference common with competitive hoists. Minimum interference with truck and body members because hoist is exclusively profiled to take the least amount of space for the performance delivered.	HOIST MODEL LM1622/1626 PERFORMANCE YOU CAN DEPEND ON! Here's the single-cylinder scissors hoist designed for today's increased capacity truck bodies. The higher capacity rating of the LM1626 increases its usage range. Both the LM1622 and LM1626 have unique low silhouette 4-way mounting options for maximum efficiency and fast mounting with minimum cutting and boxing. Extensive use of high-strength steel has reduced weight without sacrificing performance or durability. Standard double acting, power-up/power-down hydraulic cylinders permit precise load control and prevent kickback. Oil bypass in the cylinder allows oil to return to tank rather than creating excessive pressures if control is accidentally left in lift position. Maximum pressure is applied only when needed to lift the load. Both units are built to Parkhurst quality standards and backed by a full one-year material and workmanship warranty. Specifications

4-Way Mount Simplies mounting....avoids most truck chassis crossmember problems and axle interference common with competitive hoists. Minimum interference with truck and body members because hoist is exclusively profiled to take the lease amount of space for the performance delivered.	HOIST MODEL LM1628 PERFORMANCE YOU CAN DEPEND ON! Here's the single-cylinder scissors hoist designed for today's increased capacity truck bodies. The higher capacity rating of the LM1628 increases its usage range along with unique low silhouette 4-way mounting option for maximum efficiency and fast mounting with minimum amount of truck body interference. Extensive use of high-strength steel has reduced weight without sacrificing performance or durability. Standard double acting, power-up/power-down hydraulic cylinders permit precise load control and prevent kickback. Oil bypass in the cylinder allows oil to return to tank rather than creating excessive pressures if control is accidentally left in lift position. Maximum pressure is applied only when needed to lift the load. LM1628 is built to Parkhurst quality standards and backed by a full one-year material and workmanship warranty. Specifications

4 WAY MOUNT Simplies mounting...avoids most truck chassis crossmember problems and axle interference common with competitive hoists. Minimum interference with truck and body members because hoist is exclusively profiled to take the least amount of space for the performance delivered. Mount height is lower: 13.5" in conventional position, as low as 9" in inverted postition.	HOIST MODEL LM 2628 Maximum Lift with Minimum Stress on Truck Frame Here's the twin-cylinder scissors hoist designed for today's increased capacity truck bodies. The higher capacity rating increases usage range. Unique low-silhouette 4-way mounting options for maximum efficiency and fast mounting without cutting and boxing. Extensive use of high-strength steel has reduced weight without sacrificing performance or durability. Double-acting, power-up/power-down hydraulic cylinders permit precise load control; prevent kickback. Oil by-pass in each cylinder allows oil to return to tank rather than creating excessive pressures if control is accidently left in lift position. Maximum pressure is applied only when needed to lift the load. Two body props included as standard equipment. The LM2628 is built to Parkhurst quality standards, and is backed by a full one-year materials and workmanship warranty. Specifications
	DUMP BODY Introducing the 2-3 yard dump body for 1-ton chassis. The bodies will be available with drop or fixed sides, lengths will be 8'4", 9'5", 10', 11'5", & 12' with an overall width of 96" ,3"structural channel crossmembers on 12" centers and 5" structural channel longsills.